REMARK: Do not use for construction. Refer to factory certified dimensions & weights. This page includes data current at time of publication, which should be reconfirmed at the time of purchase. In the interest of product improvement, specifications, weights and dimensions are subject to change without notice.

General notes

1. Standard refrigerant connection sizes are ND 100 BSP MPT inlet and outlet (for models VXC 14 through 28 refrigerant connection sizes are ND 80 BSP MPT), consult your local BAC representative for size and location. Other connection sizes are available on special order. Refrigerant connections are standard bevelled for welding.
2. Make up, overflow, suction, drain connection and access door can be provided on side opposite to that shown; consult your BAC representative.
3. Unit height is indicative, for precise value refer to certified print.
4. Shipping/operating weights indicated are for units without accessories such as sound attenuators, discharge hoods, etc. Consult factory certified prints to obtain weight additions and the heaviest section to be lifted.
5. The drawing units with only one spray pump show the standard right hand arrangement has the air inlet side on the right when facing the connection end . Left hand can be furnished by special order.
6. Coil, overflow, make-up and spray water connections are always located on the same nd of the unit. For double pump units an additional overflow connection will be installed on the other end of the unit.
7. On model VXC 14 through VXC 135 access doors are located at the opposite of the air inlet side, ensure sufficient space for entry when positionning these units.
8. For indoor applications of evaporative condensers, the room may be used as a plenum with ductwork attached to the discharge only. If inlet ductwork is required, an enclosed fan section must be specified; consult your BAC representative for details.
9. Fan kW is at 0 Pa ESP. To operate against external static pressure up to 125 Pa, increase each fan motor one size.
10. Refrigerant charge listed is R717 operating change. To determine operating charge of R 22 refrigerant, multiply by: 1,93. For R134A, multiply by : 1.98.
11. For dry operation, standard motors must be increased one size to avoid motor overloading. Extended surface coils are available to vastly increase dry capacity without motor size increase. Consult your Bac Representative for selection and pricing.
12. Models VXC 357-454, VXC 562-380, VXC 495-516 and VXC 725-804 have only 1 coil casing section and one or two fan motors. Fan cycling results in only on-off operation. On these units all fans need to operate simultaneously.
13. Models VXC 714-907, VXC 1124-1360, VXC 990-1032 and VXC 1430-1608 have 2 coils casing sections and one or two fan motors per coil casing section. Fan cycling results in only-off operation. On these units all fans need to operate simultaneously per coil casing section.

Last update: 28/03/2024

Sound attenuation XA

VXC_sound_attenuation_XA

1. Access door; L = Unit Length; W = Unit Width; H = Unit Height (see Engineering Data).

Model Unit + Atten # pieces shipped # Access Doors Dimensions (mm) Weights (kg)
Discharge Intake W2 H1 W1 L1 L2 Intake Solid Bottom Discharge Total
14-28 41 1 2 2352 1090 1030 890 902 110 30 130 270
36-65 41 1 2 2352 1090 1030 1800 1816 175 50 185 400
72-97 4 1 2 2352 1090 1030 2710 2731 230 70 280 580
110-135 4 1 2 2352 1090 1030 3635 3645 300 100 360 760
150-205 4 1 2 2583 1600 1420 3635 3645 380 120 440 940
221-265 4 1 2 3542 2070 1955 3525 3645 500 190 530 1120
S288-S350 4 1 2 3542 2070 2365 3550 3645 500 190 660 1350
S403-S504 4 2 2 3542 2070 2365 5385 5480 660 300 830 1970
S576-S700 7 2 2 3542 2070 2365 7200 7322 1000 380 1320 2700
S806-S1010 7 4 2 3542 2070 2365 10885 10998 1320 600 1660 3580
357-454 4 1 2 4145 2560 2965 3525 3645 560 230 710 1500
562-680 4 2 2 4145 2560 2965 5365 5480 730 350 900 1980
714-908 7 2 2 4145 2560 2965 7050 7322 1120 460 1420 3000
1124-1360 7 4 2 4145 2560 2965 10730 10994 1460 700 1800 3960
495-516 4 1 2 2752 2560 3575 3525 3645 560 280 810 1650
715-804 4 2 2 4752 2560 3575 5365 5480 730 420 1020 2170
990-1032 7 2 2 4752 2560 3575 7050 7322 1120 560 1620 3300
1430-1608 7 4 2 4752 2560 3575 10730 10994 1460 840 2040 4340